Trace Heating & Insulation

Insulation

We offer insulation consisting of high density, compressions-resistant, PIR foam sections combined with water vapour resistant insulation and a protective outer shell covering. Load bearing pipe clamps that would tear or compress standard insulation tubes can be applied directly.

• Prevents condensation and corrosion
• Closed cell structure with built-in water vapour barrier
• Ease of application reduces cost and time of installation
• Inherent resistance to microbial growth
• Standard 2m lengths

NB: Minimum 25mm wall thickness required.

Trace Heating

We offer a micro self-regulating trace heating cable.

Features:

• Small and highly flexible so can be installed between pipes and insulation
• No overheating or burn even when overlapping each other
• Independent heat output control along the length
• Soft switching for energy saving and longer service life
• Self-regulating thermal performance in response to temperature
• Cut to length to suit requirements and installation conditions

Use:

• External trace heating of chemical pipeline and hoses
• Temperature maintenance in the chemical dosing market
• Frost protection and temperature maintenance
• Moisture-proof applications
• Use in hazardous locations

Specification:

• Temperature maintained up to 65°C (power on)
• Maximum intermittant exposure temperature 85°C (power off)
• Power supply 24V – 240V AC
• Outer jacket – FR polyolefin or fluoropolymer
• Heating cable dimension approx. 11.6mm x 5.6mm
• Bus wire – 20AWG Nickel plated copper
• Installation temperature min. -50°C
• Nominal power output 15 watt/m@10°C